This is an update to this article:

http://blog.provu.co.uk/item/96

Procedure for using an RTX4002 DECT repeater with a Gigaset N300 or N300A base station is:

• Power up the N300, register a handset, leave the repeater turned off.


• Using the handset, go into the settings menu, system option and select "Repeater Mode" so the box is ticked.


• Hold down the button on the front of the N300/N300A base station and keep it held.


• Still keeping the button held down, power up the RTX4002 repeater.


• The LED on the repeater should flash,


• Wait for the LED to be solidly lit - the repeater is now ready to use.

Note: you can register 6 repeaters to a single base. Each repeater must be adjacent to the base, you cannot "daisy-chain" repeaters one after the other.