Browse Tag

CS520

Plantronics CS520

How to configure Snom 720 with Plantronics CS520 and EHS Advanced V2.0

List of Components:

  1. Plantronics Base
  2. Plantronics Cable
  3. 3.5mm DC Jack
  4. Snom 4 Pin Connector
  5. Snom EHS Advanced V2.0 Adapter
  6. Plantronics Headset
  7. Plantronics Base Power Supply

Configuration:

  1. Connect the Plantronics Base(1) to the Plantronics Base Power Supply(7).

2. Connect the Snom EHS Adapter(5) to the 3.5mm DC Jack(3). Note that only the DC Jack goes into this end of the EHS Adapter, you do not need to plug anything else into this end.

3.  Connect the Snom EHS Adapter(5) to the Snom 4 Pin Conector(4).

4. Connect the other end of the 3.mm DC Jack(3) into the back of the Plantronics Base(1).

5. Connect the Plantronics Cable(2) to the back of the Plantronics Base(1).

6. Connect the other end of Snom 4 Pin Connector(4) into the slot in the picture below. Then connect the other end of the Plantronics Cable(2) into the Headset port, making sure you Do Not put it into the handset port by mistake.

7. Check the Dial settings on the bottom of the Plantronics Base(1) to make sure that they match the picture below. 

8. The headset should be ready to use. No phone settings should need to be changed, just make sure that all connections are secure and that you have power to the headset base.

How to configure Yealink T46G with Plantronics CS520 and EHS36

List of Components:

  1. 3.5mm DC Jack
  2. Plantronics phone cord
  3. Plantronics CS520 Headset
  4. Yealink EHS36 Adapter
  5. RJ12 Cord
  6. Plantronics Base
  7. Plantronics Base power supply

Configuration:

  1. Connect the RJ12 Cord (5) to the Yealink EHS36 Adapter(4).

2. Connect the 3.5mm DC Jack(1) to the Yealink EHS36 Adapter(4). Note that you only need the DC Jack in this end, you do not need to fill this socket.

3. Connect the Plantronics Base(6) to the power supply(7).

4. Connect the Plantronics phone cord(2) to the Plantronics Base(6).

5. Connect the 3.5mm DC Jack(1) to the Plantronics Base(6).

6. Connect the RJ12(5) to the EXT port on the back of the Yealink T46G. Then connect the Plantronics phone cord(2) to the headset port on the back of the phone; making sure you don’t put it in the handset port by mistake.

You shouldn’t need to change any of the settings in the phone as the Yealink EHS36 should work out of the box. However, you will want to check that on the bottom of the Plantronics base that the Dial’s are set correctly. This should be the correct setting for the dials :

How to configure Polycom VVX410 with Plantronics CS520 and EHS APP-51

List of Components: 

  1. Power connector for Plantronics Base
  2. Plantronics Headset
  3. APP-51 EHS Adapter
  4. Plantronics Base

Configuration:

  1. Connect the power connector (1) to the Plantronics Base (4) via the back of the base.

 

2. Connect the EHS Adapter (3) into the back of the Plantronics Base (4).

3. Connect the other ends of the EHS Adapter (3) into the back of the Polycom VVX410. Make sure that you connect the cable to the headset port and not the handset port by mistake.

4. In order to make sure that the headset works correctly with the phone you need to go to :

Settings > Basic Settings > Preferences > Headset Mode > Select Plantronics EHS Mode.

5. Make sure that the Dial settings on the bottom of the Plantronics base are set correctly. The correct Dial settings are below:

The headset should now work with the Polycom phone.