The steps below will show you how to enable EHS both through the phones interface and the web interface on your Fanvil phone.

Phone Interface

Step 1:

Go to Menu > Features > Advanced > EHS as shown below:

Step 2:

Using the right arrow key set the EHS option to ‘Enabled‘ and press ‘OK‘ to save changes:

Web Interface

Step 1:

Find the IP address of your Fanvil phone by going to Menu Status or by pressing the ‘OK‘ button.

Step 2:

Once you have obtained the IP address enter this into your web browser you should be then prompted for login credentials, by default these are:

Username = admin

Password = admin

Step 3:

Once successfully logged into the web interface navigate to Phone Settings Features > under Basic settings Enable a setting called ‘Ring From Headset‘ as shown below:

Step 4:

Now go to Media Settings > EHS Type > Enable > finally click Apply.

You should now be able to answer and end calls using your wireless headset.

If you have any problems/issues please contact support@provu.co.uk or call 01484 840048 option 2 for support.