Browse Month

March 2012

Door entry wiring diagram 1 – fail safe, low power, strike plate with CityLine/Skyline

This connection diagram shows how to connect a electronic door strike plate up to any of the CityLine or SkyLine IP door entry units we sell.

CityLine info.

SkyLine info.

Wiring Diagram


 

Parts required

These can all be bought from ProVu

    • Any ProTalk CityLine or SkyLine IP door entry kit

 

    • A 12Volt “fail-safe” electronic door strike (max 350mA)

 

    • A “push to break” exit switch

 

    • “VHLD” – Very Handy Little Delay board

 

Notes

  • Ensure the exit switch is push-to-break, not push-to-make, or this will not work
  • If an emergency break glass is needed, connect this in series with the normal exit switch
  • The Door Entry unit cannot supply more than 350mA from the 12Vout connector, do not attempt to use a door lock which will draw more power or you will damage the door entry unit (and void the warranty!). If you have a more powerful door lock then a separate power supply must be used (which I’ll draw a diagram for soon).
  • 12Vin is not shown connected as you can power the whole device & circuit from either this or Power-over-Ethernet.
  • You can adjust the amount of time the door is unlocked for by setting the “delay” potentiometer on the VHLD board, anti-clockwise increases the delay.

I will be drawing a series of these diagrams to suit various scenarios so keep checking here for more.

Wall mountable phones

Post updated January 2022 to include new handsets

Recently we’ve been getting more and more enquiries as to which of our phones are wall mountable.

Wall mounting is perfect for corridors and communal areas such as kitchens and staff rooms. These are ideal to be used with SIP door entry phones, allowing you to answer the door even when you’re not sat at your desk.

I have put together a guide below outlining our range of wall mountable phones:

Brand Phones Mounting details
Yealink T18P, T19P, T21P, T20P, T22P and T32G Direct to back of the phone
Yealink T30P, T31P, T31G, T33P, T33G Direct to back of the phone
Yealink T27P and T29G T29WM Wall mounting bracket required
Yealink T40PN, T41P and T42G T42WM Wall mounting bracket required
Yealink T46G T46WM Wall mounting bracket required
Yealink T48G T48WM Wall mounting bracket required
Snom 300, 320, 360 and 370 By using the phones stand
Snom 821 and 870 Wall mounting bracket required (Snom-800Wall) available in light grey and black
Snom 710, 720, 760, D710, D712, D715, D725, D765 Using Snom Wall Mounting Bracket for 700 Series Phones (00003820)
Aastra 30i, 31i, 35i, 37i, 39i, 55i and 57i Wall mounting bracket included
Cisco 301G, 303G, 502G, 504G and 525G2 Wall mounting bracket required (MB100)
Cisco 7811 Wall mounting bracket required (CP-7811-WMK)
Cisco 7821 and 7841 Wall mounting bracket required (CP-7800-WMK)
Cisco 7861 Wall mounting bracket required (CP-7861-WMK)
Cisco 8811, 8841, 8851 and 8861 Wall mounting bracket required (CP-8800-WMK)
Cisco 8845 and 8865 Wall mounting bracket required (CP-8800-VID-WMK)
Gigaset Maxwell 3 and Basic Wall mounting bracket required (S30853-H4032-R101)
Gigaset Maxwell 10 Wall mounting bracket required
Gigaset DECT A510H, A540H, C300H, C430H, C610H, E49H, R410H, R630H, S510H, S650H and S810H Direct to the back of the cradle
Gigaset DE310 and DE410 Wall mounting bracket included
Gigaset DECT N300IP, N510IP Direct to back of base station
Panasonic KX-UT113 and KX-UT123 Requires wall mounting kit (KX-A432-B)
Panasonic KX-UT133 and KX-UT136 Requires wall mounting kit (KX-A433-B)
Panasonic KX-HDV130 Requires wall mounting kit (KX-A440XB)
Panasonic KX-HDV23 and KX-HDV330 Using bracket provided
Panasonic KX-TPA65 Requires wall mounting kit KXA440XB
Polycom SoundPoint IP 32x/33x and 430 phones Using the reversible base stand/wallmount unit (included with phone)
Polycom SoundPoint IP 450 Requires wall mount kit (2200-11611-002)
Polycom SoundPoint IP 550, 560, 650, and 670 Requires wall mount kit (2200-12611-001)
Polycom VVX 101, 201 Reversible deskstand/wallmount (comes with phone as standard)
Polycom VVX 300/310, 300/410, 500 and 600 Requires wall mount kit (2200-44514-002)
Mitel 6863, 6865,6867 and 6869 Requires wall mount kit (80C00011AAA-A)
VTech VSP715A, VSP725A and VSP735A Direct to back of phone
VTech VSP600A Using bracket provided
VTech VSP601A Direct to the back of the cradle

Phones that cannot be mounted to the wall: SL750H, DE700IP PRO, DE900IP PRO, DX800a, SL400H, SL610H PRO, T26P, T28P and the T38G.

Door Entry Demo Kits

In order to properly demonstrate what our door entry kits look like and what they can do, I’ve turned my hand to a bit of metalwork and woodwork to make these display stands:

If you are at our Huddersfield or London Open Days then you can see these in action.

For more door entry info, have a look at the door entry section on our website.

We will have this demo kit set up at all times in our Huddersfield afterwards so if you are in the area pop in and have a look. Our plan is to have as much of our product range as possible on display and working so people can see what it does.

Oh and the brickwork image on the backgrounds of the stands is a genuine Savile Mill (the ProVu office) wall stone photo! No Google Image Search used here….