This year will mark our 3rd year of exhibiting at the Convergence Summit South, taking place at Sandown Park Racecourse on the 7th & 8th October. Joining us this year will be Sangoma, Snom, Gigaset and Yealink.
The exhibition is free to attend and is a great opportunity to meet new and existing clients.
Please register your attendance below and don’t forget to come and visit us at stand 73!
The Konftel 300Wx can be paired with a Gigaset N300IP as a gap compatible device. This will allow the Konftel 300Wx to make and receive calls via the N300IP. Please note that the 300Wx does not bridge conference calls and it is unable to transfer calls. The N300IP allows the 300Wx to connect to VoIP and/or a fixed line. Below is a simple setup guide of how to pair the N300IP and 300Wx:
How to put the Konftel 300Wx in to registration (Pairing) mode
1) Power on the Konftel 300Wx
2) Once the device has booted press the settings key (it is a symbol of a cog)
3) Scroll down to “settings” and then press OK
4) Once in the settings section select “DECT”
(Before continuing to the next step, put the N300IP in to registration mode)
5) Once in “DECT” Select “Register” and then choose the base you would like to pair the Konftel 300Wx up to.
6) Once the base has been selected enter the “pin code” and then wait for the Konftel and the N300IP to pair.
(The pin code is what you enter to access the WUI of the base).
How to put the N300IP in to registration (pairing) mode using the WUI
Note – You can also pair the Konftel to the base by holding the pair button on the front of the N300 when the Konftel is in registration mode
1) Power on the N300IP
2) Log in to the web user interface for the N300IP
3) Click the “Settings” tab on the WUI of the N300IP and then select “Management”
4) Under “Management” select “Miscellaneous”
5) On the “Miscellaneous” page select “Start registration”
6) After selecting “Start registration” put the Konftel 300Wx in to register mode.
Number Assignment
1) Once the Konftel has paired to the base, log in to the web user interface of the N300IP
2) Once logged in to the WUI click the “Settings” tab and select “Telephony” and then “Number Assignment”
3) Once the “Number Assignment” page has loaded you can rename the INT slot that the Konftel has been assigned and you can also choose which connection (extension) the Konftel will use to make and receive calls.
IMPORTANT NOTE – In order for the N300IP and Konftel 300Wx to work properly you will need to turn “ECO Mode+” off. (If this setting is turned on, after a while the Konftel 300Wx loses connection to the base)
“Eco Mode+” can be found in “Miscellaneous” on the WUI of the N300IP
With the summer season now upon us, we are delighted to announce 3 great new bundle offers that will run from 1st June to 31st August 2015.
Bundle 1: Buy any 3 or more Gigaset pro handsets and get the N510IP DECT base unit FREE.
Includes the S650H, R630H and SL610H handsets. The N510IP base supports up to 4 simultaneous IP calls and POE. Use the following bundle codes to get your N510IP free:
Bundle 2:
Buy 4 N720 IP Multicell DECT bases and get the DECT Manger FREE.
Bundle 3: Buy one of the new T440 or T640 Gigaset IP PBX systems and get a Maxwell 10 tablet phone FREE.
To take advantage of bundles 2 and 3, please contact the ProVu sales team on 01484 840048.
We are pleased to announce the new Gigaset pro T-series range of PBX systems which are now in stock at ProVu. There are two new models, the T440 PRO PBX which supports 2 to 100 seats and the T640 PRO PBX supporting larger companies for up to 250 seats.
These are all-in-one communication platform based on a flat license model and offer:
Register for a demonstration:
Gigaset will be travelling the country over the next few weeks and are keen to hear from interested resellers who would like a demonstration. You can let us know if you would like a demonstration by sending us an email to contact@provu.co.uk.
As you are aware the A510H has gone end of life and until the replacement A540H arrives we have fantastic offers on the C430H and N300IP bundles as well as on the individual handset.
Until the end of May only you can buy the N300IP and C430H bundles at the same price as the N300IP and A510H bundles. You can also buy the C430H individually at a reduced price.
If you would like more information on pricing please don’t hesitate to give us a call, alternatively you can view the reduced pricing on ProSys.
We hope that you will be able to take advantage of this excellent offer while we await delivery of the new A540H handsets.
https://www.youtube.com/watch?v=ENbW-GIHlsI
This is a video showing us at ProVu drowning the Gigaset R630H just to see if it can actually survive under water whilst on a call. It turns out it can survive underwater which is great!
I wouldn’t recommend trying this as I can’t guarantee that it won’t break so please don’t try this at home!
Once again ProVu will be exhibiting at the Convergence Summit North and this time it is being held at the International Centre in Harrogate on 17th and 18th March.
This is a great opportunity to come and meet the ProVu team and view the latest products from snom, Konftel, Gigaset and Sangoma.
On display this year we will be featuring the exciting Gigaset Maxwell 10 tablet phone plus their latest cordless handsets. We will also have the very latest phone designs from snom with their D7 series. Sangoma will also be showcasing their new mini SBC which is designed for small companies and branch offices with call handling from 5 to 16 calls. And for the first time we will be joined by Konftel with their range of conference phones which support SIP.
We will be located on stand 47 and we would love to meet as many of you as possible. All you need to do is register to attend at the link below.
Pre Register Now to attend the show
We look forward to meeting you at the show and if you have any queries or would like to arrange a meeting please drop us a line at contact@provu.co.uk.
This guide is intended to show how to route calls to your Vega 50 4FXO Gateway and out over your PSTN Line. It also includes the settings to route inbound calls from the PSTN line to phones registered to the Gigaset Hybird PBX.
This guide assumes that you have already connected the Gigaset PBX and Vega Gateway to your network and have access to the web interface of each device. If your units are not already plugged in with access to the web interface, please consult the relevant product manuals to get to this stage.
This guide also assumes that you have registered one or more SIP phones to the PBX and configured them as Users on the system. If you have not already done so please consult the Hybird manual for details.
Configuring the Vega 50 4FXO Gateway
To configure this unit, use the Quick Config wizard on the Vega Web Interface. The settings need to be changed as follows:
VoIP Tab
Registration Mode: Off
Outbound Proxy Used: No
SIP Domain: IP Address of your Gigaset PBX
SIP Server IP/Name: IP Address of your Gigaset PBX
FXO Tab
These settings are applied for Interface 0201, assuming that you have connected your analogue line to the FXO1 port on the box.
Numeric Caller ID: Your Analogue Line Telephone Number
DID to Forward to SIP: Your Analogue Line Telephone Number
Once this has been done you need to click Submit, then Apply Changes and finally Save.
This is all the configuration that needs to be done on the Vega, we now need to configure the Hybird.
Configuring the Hybird
To configure this unit via the Web UI, follow the steps below:
Step 1
Go to the VoIP > Settings page and click New to add a new provider, configure the provider as follows:
Description: Vega
Authentication ID: Your Analogue Line Telephone Number
Password: Leave this blank
User Name: Your Analogue Line Telephone Number
Domain: IP Address of the Vega Gateway
Registrar: IP Address of the Vega Gateway
Click Advanced Settings
Proxy: IP Address of the Vega Gateway
Provider Without Registration: Enabled
Click OK to save the setup.
Back on the VoIP > Settings page, click the Locations tab:
Set Default Behaviour: No Registration and click OK to save the setup
Step 2
Go to the Numbering > Trunk Settings page. You should see a Trunk called Vega with the External Port set to SIP Provider. If this is not there, please check that you have completed Step 1 successfully.
Go to the Trunk Numbers tab and click New to create a new Trunk Number, configure it as follows:
Trunk: Vega
Type of Number: Single Number (MSN)
Displayed Name: Your Analogue Line Telephone Number
Single Number (MSN): Your Analogue Line Telephone Number
Click OK to save this Trunk Number
Now go to the Trunk Groups tab and click New to create a new Trunk Group, configure it as follows:
Description: Vega
Sequence in Trunk Group: Vega
Click OK to save this Trunk Group
Step 3
This step assumes that your SIP Phones/Users are all using the CoS Default rule. If they are using a different CoS rule then please use the appropriate rule in the steps below
Go to the Numbering > User Settings > Class of Services tab and edit the CoS Default rule, and set as follows:
Automatic Outside Line: Enabled
Trunk Line Selection with Line Access Number: Click Add and select Vega from the drop down.
Click Apply to save the config.
Step 4
Go to Numbering > Call Distribution and on the Incoming Distribution tab you will see an entry of Type Single Number MSN, with your Analogue Line Telephone Number as the number. Edit this line and set as follows:
Assignment: Internal Number
Internal Number: Your SIP phone User number that you want to dial.
Setting it up as above will route any inbound calls directly to that specific phone. If you want to route it elsewhere then change the Assignment and route it accordingly, there are numerous ways to configure this which will not be covered in this guide.
Thats it!
You should now be able to dial out over your analogue line and inbound calls to your number will route according to your setup in Step 4.
Note: Step 3 configures the setting Trunk Line Selection with Line Access Number. This means that you will have to dial the access number to use this trunk. This setting can be found in the System Management > Access Codes. There is a setting there called Trunk Group Selection, click Add and select Vega from the Trunk Group drop down list. Set the Access Code to whichever number/numbers you want to use to route calls over your Vega/Analogue line.
e.g. Entering 9 in this box will require you to prefix your dialled number with a 9 in order to use this line.
If you have problems setting this up, please email support@provu.co.uk explaining which step you are up to and the problems you are facing.
Great news, having recently taken a bulk shipment of N510IP PRO bases and R630H PRO ruggedized handsets we are now able to bring you a great new bundle offer at an even LOWER price.
The N510IP supports 4 SIP calls and PoE plus the R630H is ideal for tough environments with its IP65 rating ensuring it is dust proof, highly water resistant and will easily handle the usual rough treatment a cordless phone can take in the work place.
The new bundle prices are now available to order on ProSys our reseller portal. If you do not have a login for ProSys please call the ProVu sales team on 01484 840048 or email contact@provu.co.uk.
Gigaset have extended the Gigaset pro bundle offers again until the end of June ’14. So be sure to take advantage of these offers by selecting the relevant order codes on ProSys. These bundles are tailored to suit many different working environments, so your customers will benefit from the perfect solution designed for their own unique business requirements.
1 Buy EIGHT of the new R630H PRO handsets + a N720IP PRO base and get the N720DM PRO FREE of charge. This is an expandable roaming solution for working environments which cover large areas such as: care homes, car dealerships, factories and garden centres.
2 Buy THREE R630H PRO handsets and get a N510IP PRO base FREE. This is the ideal solution for small businesses particularly where the rugged handsets are tough enough to withstand many harsh working environments such as garages, warehouses and shop floors etc. (ProSys order code: N510IPR630-3)
3 Buy a DX800a + TWO S510H PRO and get another TWO S510H PRO handsets FREE. This is the perfect solution for small offices such as law firms, doctor’s practises and small home business. (ProSys order code: DX800AS510-4)
Please note ProVu Communications Ltd are a trade only distributor. All pricing is available on ProSys, our Reseller portal. If you are an ITSP, telecoms retailer or telephony system installer sign up to become a ProVu reseller.