Browse Tag

T41S

Connect further with the Yealink W90 DECT solution

Introducing the latest in Multi-Cell DECT solutions with Yealink’s industry leading W90 Multi-Cell DECT system. Featuring seamless handover as well as extended cover range, it’s ideal for use in large spaces such as warehouses, hospitals, hotels, supermarkets and other large retail spaces.
Supporting up to an incredible 60 bases stations and 250 handsets, the W90 is designed to grow with your business and can be deployed easily and effectively!

Explore the W90

       

W53H

W56H

W59R

CP930W

The W90 Multi-Cell DECT solution is also compatible with Yealink’s great range of DECT handsets, speakerphone and desk phone; W53H, W56H, W59R, CP930W & DD Phone (T41S + DD10K).

Get in touch with our expert sales teams on 01484 840048 or email contact@provu.co.uk to find out how to level up your Yealink Portfolio today!

Yealink – Adjusting the sending volume (outgoing volume) on the T2, T4 and T5 Series Phones

You may be getting reports from your customers saying that when they are on a call, the opposite party is telling them that their audio is too quiet, or maybe even too loud when they talk. Usually this isn’t a problem because the opposite party can adjust the volume of the person calling with their own phone, but what if the opposite party has already done that and it’s still too quiet or too loud?

If that is the case then you may be able to adjust three settings on the Yealink device. These can found on the web user interface by going to the ‘Features’ > ‘Audio’ page and adjusting the settings in the image below outlined in green.

An alternative way to think what these settings do is adjusting how sensitive the microphone is on the device. You can adjust the handset, headset and handsfree sensitivity to be weaker or stronger. The valid values are between -50 and 50. The higher the value, the louder it should be. The lower the value, the quieter it should be.

When adjusting this setting it is important to be cautious. Incorrectly configuring the value can have adverse effects on the audio quality so it’s advisable to gradually increase or decrease the value until you find the right spot.

If you control your own provisioning server and would like to configure this remotely you can use the provisioning parameters below:

voice.headset_send
voice.handset_send
voice.handfree_send

Hopefully after adjusting these settings it resolves the issue and provides a better experience for the end-user and the opposite party on the calls.

For further technical assistance with your Yealink devices please contact our support team by emailing support@provu.co.uk.

Yealink T41P, T42G, T46G & T48G ‘End of Life’ Notice

Yealink T41P, T42G T46G & T48G End of Life

We have been informed by Yealink that the T41P, T42G, T46G and T48G are now end of life and are no longer available to purchase. These products will continue to be covered under Yealink’s warranty until 31/03/2021.

These devices will now be replaced by the T41S, T42S, T46S and the T48S which offer additional functionalities and advanced technology.

Here’s a list of the differences between the Yealink T4 and newer T4S Series

If you have any queries or would like to discuss how these changes may affect any projects you are working on, please call the sales team on: 01484 840048 or you can email: contact@provu.co.uk.

Yealink USB Call Recording

Supported Yealink Models

SIP-T54S, T52S, T48G, T48S, T46G, T46S, T42S, T41S, T29G, T27G.

Enabling USB call recording

By default this feature is disabled, if you wish to use a USB stick to record calls you need to enable the following parameter:

features.usb_call_recording.enable
Valid Values: 0 or 1
1 = ON
0 = OFF

Note: this feature cannot be enabled via the web user interface or via the phone directly. It can only be done by a provisioning parameter.

If you are having your Yealink devices provisioned by ourselves and would like to use this feature just drop us an email and we can apply this to your template.

Uploading a CFG file

If you aren’t able to provision this setting to the device you can add the settings below to a plain-text file and upload it directly to the unit from a PC and it will enable the feature:

#!version:1.0.0.1
features.usb_call_recording.enable = 1
Remember to save the text file as “.cfg”

To upload the config file login to the web user interface of the phone and go to “Settings” > “Configuration” > Select the “Choose File” button next to “Import CFG Configuration File” and select the file on your PC > After selecting the file press the “Import” button for it to upload.

After the file has been uploaded the setting will be enabled.

Using USB call recording

1) Connect the USB stick to the phone and it will display a message saying “USB Flash Drive Connected” and display a logo of a USB Stick in to middle of the screen like above. (This will appear even if the setting is not enabled)

2) To use the feature during a call you will now notice a “More” soft-key appears. If you press this, you will get the option to start recording the call.

3) Press the “Start REC” button then you will have the option to pause or stop the recording. If you pause the recording you will have the option to start again or stop.

4) If you press the stop option you will see a notification saying the recording has successfully been saved.

5) To listen to the recording either disconnect the USB and connect it to a computer or alternatively press  the “Menu” button whilst the phone is not on a call and press enter on the “USB” option.

6) Then Select “Browse Audio”

7) Then select an audio file and press play:

8) The recording will then automatically start playing. You can pause, rewind and fast forward the recording.

Differences between the Yealink T4 and new T4S Series

What’s new
Visually the new T4S series is identical to the equivalent model in the T4 series, however, Yealink have been working on a number of enhancements and reasons to move over to the T4S series:

  • Device performance enhancement: The T4S phones use the latest components to maximise the models’ performance and boost the user interface response rate.
  • Future-proof: As Yealink continue to add new and more powerful features to their phones’ firmware they will in turn require a higher level of hardware support. The new T4S’ are future-proof as they are equipped with new hardware components to allow the phones to support future firmware upgrades.
  • Opus support: Opus is an increasingly popular HD codec, especially in the carrier / ITSP market for use with WebRTC. This will provide the T4S models with a competitive edge.
  • Enhanced speaker performance: The T4S utilises new speaker components to maximise acoustic performance over the devices’ speaker phone.
  • USB ports: The new T41S and T42S models feature a USB port. The USB port allows for increased functionality with support for either the BT40 bluetooth dongle, WF40 Wi-Fi dongle or a compatible USB headsets.
  • Unified firmware: The new hardware for the T4S series allows for a unified firmware across the model range making management and provisioning easier and more convenient.
  • HAC handsets: All T4S models will be supplied as standard with a Hearing Aid Compatible (HAC) handset.

Please note, the new T4S phones will support V81 and later firmware. The firmware which supports T4S phones is different from the one which supports the current T4 series.

Trade pricing and RRP of the new T4S models will be the same as the equivalent model in the existing T4 series of phones.

NEW Yealink T4S Series coming soon!

As you may be aware, Yealink have been busy working on a new range of IP desk phones. Expected to be available to purchase in September 2017, the new T4S series will be the next generation of the popular T4 series – Here’s a sneak peek of what to expect!

T41S
Yealink T41S SIP Desk Phone		 T42S
Yealink T42S SIP Desk Phone
T46S
Yealink T46S SIP Desk Phone		 T48S
Yealink T48S SIP Desk Phone

NFR Test Samples
We a have a limited number of NFR samples available for our resellers to test, helping you to ensure you are ready to go upon launch in September! These new models will be released on a new firmware version, we strongly recommend testing them on your platform prior to selling them to your customers. Please contact our Sales Team on 01484 840048 for more information, pricing and up to date availability.